Have you heard any peculiar sounds coming from the walls in your home? Does it seem like someone is hammering on the door every time you flush the toilet or start a load of laundry? This is a phenomenon that is referred to as water hammer. It is a typical issue seen in both newly built and older residences. Experts in plumbing in Las Vegas put up this troubleshooting information for your perusal. pre-1960 Before the 1960s, air chambers were often used in residential construction to mitigate the effects of water hammer. “T” shaped pipe formations are what make up air chambers. These pipe formations provide room for air within the fitting. Because the air within the air chamber works as a shock absorber, water hammer is not caused when water rapidly runs through a track of pipe. However, over time, air chambers may get saturated with water and lose their ability to function properly. Due to this particular reason, this particular form of fitting is not utilized any more. houses constructed after 1960 often made use of air arrestors, which were the forerunner to the defunct air chamber. Both the air chamber and the air arrestor have the same function, which is to enable a pocket of air to serve as a shock absorber against the force of water hammer. A piston that is housed inside the arrestor is free to float within the chamber. Although the piston swings up and down to adjust for changes in pressure as water travels through the pipes, this movement does not let the chamber to be entirely filled with water. additional explanations The most frequent cause of banging pipes is water hammer, which occurs anytime an air chamber or air arrestor fails to do its job. Nevertheless, the pounding might possibly be coming from straps that are too slack. Straps made of metal are used to secure the pipes to the structure of your house. They may get dislodged over time, which might result in a hammering sound inside the walls. An excessive amount of banging might also be caused by high water pressure. This issue may be remedied by installing a pressure reducer valve, but doing so is not without its challenges. Contacting the local plumbing pros in Las Vegas will provide you with further information as well as assistance in isolating the specific cause of your plumbing issue.